Are you looking for complete steps of how to configure D-link DSL-224 Router?
D-link DSL-224 ADSL2+/VDSL2 Wireless N300 Router in brief:
1- ADSL/ADSL2+/VDSL Connection which provide you with high-speed internet access for your home/office.
2- 802.11n wireless gives you the bandwidth to stream HD multimedia, so you can browse the Internet and stream digital media at combined speeds of up to 300 Mbps
3- Four Fast Ethernet LAN ports to connect wired devices for high-speed online activities.
Before We start Configuration/ Setup procedures:
- you will need a laptop / PC directly connected to your DSL-224 either using Ethernet cable (yellow cable coming with the device) Or through router default wireless network name.
"Default wireless network name : dlink with no security, not required to enter password"
- you may use your phone/ Mac book if you're familiar enough to deal with them through configuration Steps.
- you must have your Connection Username/Password from your ISP (internet service provider)
Information you will need about your DSL-224 Router
D-link DSL-224 Default IP Address: 10.0.0.2
D-link DSL-224 default Login Information:
Username : admin
Password : admin
Let's Start............................
1- Open your Browser ( internet Explorer, Mozilla Firefox, Safari, Google Chrome,....)
2- Type in the address bar 10.0.0.2 and press enter.
3- Enter Router default Username/ Password: admin/ admin
4- Click on setup > then from left hand side menu click on Internet Setup.
5- At the end of the screen, Remove "Current Wan Table".
As in below screens.
6- Make sure that Wan Protocol type: DSL WAN Selected
7- Fill ATM Settings as in below Screen
Channel Type: ATM
VPI = 0
VCI = 35 "0 , 35 Values may vary depend on your country and ISP"
Channel Mode = PPPOE
IP Protocol = IPv4
PPP Settings >> Enter your ISP connection Username and password
Username Example: "258477@tedata.net.eg"
Click On ADD.
Channel Type: PTM
Channel Mode = PPPOE
IP Protocol = IPv4
PPP Settings >> Enter your ISP connection Username and password
Username Example: "258477@tedata.net.eg"
Click On ADD.
9- Now You should found one of the two interfaces status : UP depend on your line either it is ADSL or VDSL line. As Below Picture
What if internet status still disconnected?! internet didn't work well with you.
Well, in this case,
- First, you have to make sure that information you have got from your ISP like ( VPI, VCI, Username, Password) are correct. Just call your ISP number ask them to verify theses information for you.
- Second, If your line subscription with your ISP is ADSL not VDSL means you don't need VDSL CPE Check, you may try to do the following step on your DSL-224 Configuration page.
Click on setup > Internet setup > ADSL Settings
Then Remove check mark in front of VDSL2, Click on Apply settings as in below screen shot.
Now you have to wait for seconds before checking again your internet status.
DSL-224 VDSL2/ADSL2+ D-link Router
Is perfect for home and office environments. Its high-speed wireless provides reliable connections to wireless devices.
wireless Connectivity designed to go up to 100 meters indoors and up to 300 meters outdoors, wireless LAN lets you access your network from anywhere you want.
However, the numbers of walls, ceilings, or other objects that the wireless signals must pass through limit signal range.
Typical ranges vary depending on types of materials and background RF noise in your home or business.
In our next Articles we will show you how to select best location for your Wireless router.
Also how to setup wireless configuration on DSL-224 Home Router.
If you would like to know how to increase your WiFi / Wireless range and overall wireless performance, Click here.
You may also like to read about:
- How to change your WiFi password?
- What is a WIFI Router?
- How to Configure D-link DSL-2888A Home Router?
If you have any questions please leave a comment below and we will contact you ASAP.
I am always looking for some free kinds of stuff over the internet. There are also some companies which give free samples. But after visiting your blog, I do not visit too many blogs. Thanks. https://192-168-i-i.com/cisco-router-default-password/
ReplyDeleteI admire this article for the well-researched content and excellent wording. I got so involved in this material that I couldn’t stop reading. I am impressed with your work and skill. Thank you so much. If anyone looking for the best Fiber Optic Products Manufacturers online, precisionfiberproducts is a good choice.
ReplyDeleteThank you so much, very very helpful article
ReplyDeleteYou're Welcome :)
Deletehello! my bundle must be vdsl 30mbps but still after setup these settings working on adsl2+ not vdsl and i receive less than 13mbps also not 30 so its problem with isp or my settings ?
ReplyDeleteFirst please Make sure that your line is VDSL Activated from ISP, then check that your router settings is set to PTM (VDSL), it should work with you.
DeleteHow can you tell which is the best product from the list on this site?
ReplyDeletehttps://buywirelessrouternow.com/best-wireless-router-under-50-usd/
WPS light is not getting on...& i am not able to connect my tv to D-link DSL-224 Router.. please let me know the procedure..
ReplyDeleteThat added info in the end on what to do if its still not working saved my life after 2 hours of debugging thank you <3
ReplyDeleteyour comment made my day :) thank you
DeleteHi,please is this N300-DSL224?
ReplyDeleteIf it is I need the supported list of usb types.
Hi, Yes it is , but this model does not contain USB Port.
DeleteWhat is ethernet WAN in the picture
ReplyDeleteDoes this support fiber connection?
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteKeep it up and in the future sharing more articles like this. I am amazed by the way you have explained things in this article. You are sharing a piece of nice information, it helped me. Thanks for this message. fiber cleaner.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeletehello , can any one help me Configuring switching my D-Link DSL-224 Router to act like access point . Thanks
ReplyDeleteYes, There is new Amazing Update, please Contact D-Link Technical support team to get it
ReplyDeletePhone number: 02-25866777
Hi there, Any idea on how to setup dsl-224 via wan internet? My ISP has bridged their router to my dsl-224 so that am able to configure internet connection and vpn server on the dsl-224. Any ideas?
ReplyDelete